TCT Shenzhen

Home / MEDIA / TCT INFORMATION / TCT Shenzhen / Formlabs Unveils Form Studio 1 at TCT SHENZHEN 2026

Formlabs Unveils Form Studio 1 at TCT SHENZHEN 2026

Source:        DateTime:2026.11.04        Hits: 21

At TCT SHENZHEN 2026, held from October 14 to 16 at Shenzhen World Exhibition & Convention Center, we welcomed a range of new equipment and technologies from across the additive manufacturing industry. One of the product introductions on the exhibition floor came from Formlabs, which unveiled its new Form Studio 1 resin 3D printer at its booth on October 15.

Formlabs had announced the product on October 14 and opened orders on the same day. With a US starting price of $699 and shipments scheduled to begin on November 16, the new model is designed to make selected professional resin-printing capabilities available to a wider range of users. These dates and prices are manufacturer-announced information and may vary by market.

Form Studio 1 printers displayed at the Formlabs booth at TCT SHENZHEN 2026. Photo: AM Insight Asia / Chikai Eto.

A New Resin Printer Introduced on the Exhibition Floor

Visitors to our exhibition could see Form Studio 1 following the product unveiling on the second day of the show. The machine features a translucent lower housing, with the launch Founder’s Edition offered in graphite, aqua, teal and violet. The color options and visible internal electronics are distinctive elements of the product's design.

Formlabs positions the machine for applications including figurines, models and other parts in which fine surface details are important. The introduction also illustrates how workflows developed for higher-end resin printers are being incorporated into more accessible equipment.

Low Force Display Technology and Print Specifications

Form Studio 1 uses a print engine based on Low Force Display (LFD) technology developed by Formlabs. According to the manufacturer, the optical system uses 28 LEDs and a lens array to provide uniform illumination of 6 mW/cm² at the print plane. Its exposure liquid crystal display (LCD) has a 35 µm pixel size, with anti-aliasing used to help reproduce fine features.

The stated build volume is 20.0 × 12.5 × 23.5 cm. Formlabs reports that most prints are completed in under two hours, although actual print times depend on part geometry, material and print settings.

Automated resin dispensing and heating from cartridges are intended to simplify material handling. The optional Build Platform Flex supports tool-free part removal. At launch, nine Formlabs resins have dedicated print settings, while the optional Resin Tank Pro enables use of third-party resins.

Form Studio 1 with the cover open and build platform raised. Photo: AM Insight Asia / Chikai Eto.

Post-Processing and Software Tools

Formlabs also introduced complementary tools for the Form Studio 1 workflow. Form Studio Wash+Curecombines washing and post-curing in one unit, while the VOC Extractor is designed to capture volatile organic compounds (VOCs) emitted during printing. The Form Mobile app lets users remotely check print progress using the printer's built-in camera.

The manufacturer lists Form Studio Wash+Cure at $199 and a package containing the printer, Build Platform Flex and Form Studio Wash+Cure at $948, excluding US taxes. The entry-level $699 configuration includes the printer, resin tank and standard build platform. Resin prints generally require washing and post-curing before use.

Materials, Emissions and Certification Conditions

Formlabs introduced six Alpha Resins—Grey, White, Black, Clear, Model and Fast—with stated US pricing beginning at $29 per litre. The company also highlighted UL GREENGUARD Gold Certification in connection with indoor chemical emissions.

It is important to distinguish the certification conditions from general product claims: according to the cited product information, the GREENGUARD Gold certification applies to the specified combination of Alpha Resins and the VOC Extractor, not to every possible resin or operating configuration. Formlabs states that, with this configuration, emissions remain below 220 µg/m³ under UL 2819. Users should refer to the manufacturer's current safety instructions and applicable ventilation requirements for their own installations.

The company also cites a 98% print success rate in launch materials; however, the associated note references performance comparable to the Form 4's independently tested 98.7% result, while Form Studio 1's own reliability testing was still in progress at the time of the announcement. We therefore present this as a manufacturer-reported claim rather than a verified result for the new model.

Resolution and Dimensional Accuracy Serve Different Needs

The product launch also highlighted a useful distinction for resin additive manufacturing: display resolution is not the same as dimensional accuracy. A smaller LCD pixel can support finer details, but printed dimensions are also affected by resin shrinkage, processing and other factors.

Form Studio 1 uses a 35 µm LCD pixel size, compared with 50 µm for the Form 4. Yet the published dimensional tolerances for features between 1 and 30 mm are ±0.5% (minimum ±0.08 mm) for Form Studio 1 and ±0.15% (minimum ±0.02 mm) for Form 4. These specifications describe different performance considerations rather than a simple ranking of print quality.

Accordingly, Formlabs identifies figures and display models among the key uses for Form Studio 1, while positioning Form 4 for dimensional accuracy in functional prototypes and end-use components. Selecting a system ultimately depends on part requirements, material properties and the intended production workflow.

Internal electronics visible through the translucent lower housing of Form Studio 1. Photo: AM Insight Asia / Chikai Eto.

Connecting New Equipment with Practical Applications

For us at TCT SHENZHEN, the Form Studio 1 introduction was one example of how equipment manufacturers are refining resin 3D printing workflows for different user groups. Alongside new machines, our exhibition provided a place to explore materials, post-processing systems, software and application requirements in one setting.

We will continue to bring together equipment suppliers, material developers, software providers and industry users to exchange technical information and explore practical opportunities for additive manufacturing.

For more exhibition updates and the latest news on 3D printing and additive manufacturing, visit the official TCT website.


Editorial and image credits: This TCT SHENZHEN exhibition recap is independently written using information from the Formlabs product announcement and a report by Chikai Eto for AM Insight Asia (October 18, 2026). Original photographs remain credited to AM Insight Asia / Chikai Eto.